Анаэробный герметик Hylomar Gasket 2000

Hylomar Gasket 2000 Анаэробный фиксатор резьбы

в корзину Уже в корзине!

Гибкая анаэробного отверждения соединяющая прокладка для обработанного металла в металлических соединениях.

Hylomar Gasket 2000

Разработано произведено и испытано компанией Hylomar (OEM) уплотнительное соединение

Размеры Упаковка - 50 мл и 250 г

HYLOMAR GASKET 2000 
Anaerobic curing flexible gasket compound 
 
Description 
Hylomar Gasket 2000 is a formed in place (FIP) single component anaerobic curing flexible sealant, 
which cures in the joint to form a flexible plastic seal. The product is designed to replace traditional 
solid gaskets. 
 
The thixotropic properties of Hylomar Gasket 2000 prevent migration of the sealant before or during 
curing. Once cured the compounds are resistant to shock and vibration from –50°C to 150°C. 
 
Physical Properties, Uncured Product 
 
Composition Anaerobic Methacrylate 
Colour Ivory - cream 
Viscosity @ 25°C 
Brookfield Spindle 6 @ 20rpm 
85,000 + or – 15,000 cps 
Max diameter of thread/gap filling 0.50 mm (if used with primer) 
Solvent content None 
Specific Gravity g/ml @ 25°C 1.04 
Flash Point >100°C 
Shelf Life @ 25°C 1 Year 
 
Cured Product 
 
Average Cure Time 1 hour 
Functional Cure Time 3-6 hours 
Full Cure Time 24 hours 
Elasticity 82% 
Shear Strength (DIN 54452) 4 – 7 N/mm 
Tensile Strength 2.5 – 4 N/mm 
Shock strength 2 – 4 N/mm 
Temperature Range -50°C + 150°C 
Instructions for Use 
Hylomar Gasket 2000 should be applied to a clean and dry metal surface. The compound may be 
dispensed by hand from a cartridge or concertina packs. Automated application is also widely used 
via a xy plotter, robot arm or via a silk screen printer. Once applied the joint should be assembled 
without undue delay. Any excess compound can be easily wiped off external surfaces using a 
clean cloth soaked in Acetone, or other suitable solvents. 
 
If joints are dismantled for service or repairs, the cured product can be easily removed and surfaces 
cleaned for fresh application by using a clean cloth soaked in Acetone, or other suitable solvents. 
Revision date 25.05.2010 Hy Page 1 of 2 lomar Ltd, Cale Lane, Wigan WN2 1JT UK 
Tel: +44 (0) 1942 617000 
Product name Hylomar Gasket 2000 issue 3 Fax: +44 (0) 1942 617001